Light wire pliers
(106-07 Standard)
Hardness of Tip;HV713-856 (HRC 60-65) Cutting edge made by Nano technology
Used to make different fine loops for arch wires and to make spring loops.Wires diameter up to 0.030"(0.76mm)
|
4,250.00
|
|
|
Light wire pliers with cutter
(106-08 Standard)
Hardness of Tip;HV713-856 (HRC 60-65) Cutting edge made by Nano technology
Used to make different fine loops for arch wires and to make spring loops.Tip with Cutting Edge for Wires
|
4,250.00
|
|
|
Heavy cutter
(106-09 Standard)
Hardness of Tip;HV713-856 (HRC 60-65) Cutting edge made by Nano technology
Used to Cut Austrila Wires,NiTi wires,stainlesssteel wires,wires diameter upto 0.030"(0.76mm)
|
4,250.00
|
|
|
NITI cinch back pliers
(106-10 Dual Direction (Standard))
Hardness of Tip;HV713-856 (HRC 60-65) Cutting edge made by Nano technology. Used to cinch back distal end arch wires to avoid any injury of soft tissue.
NiTi wires diameter upto 0.021"(0.53mm)
|
4,250.00
|
|
|
V Stop Pliers
(107-01)
Used to make V Stop along arch wires to prevent any movement
|
5,000.00
|
|
|
Cap removing Pliers
(107-02 Standard)
To Remove the caps of convertible tubes
|
5,000.00
|
|
|
Multi-Function Pliers
(107-03)
Hardness: HRC 52-55
Used to bend,flatten and cut wires
|
5,000.00
|
|
|
Rubber dam puncher
(107-04)
Hole Diameter 1.4,1.6,1.8,2.1,2.3
|
4,250.00
|
|
|
Torque Pliers
(105-01)
Hardness of Tip:HV713-856 (HRC 60-65)
used in pair to make torques on rectangle wires,thickness of tips:0.050"(1.27mm)
|
4,250.00
|
|
|
Tweed loop Pliers
(105-02)
Hardness of Tip:13-856(HRC 60-65)
To make small loops,distal stops and loops on arch wires
|
4,250.00
|
|
|
Band Remover
(103-03 Posterior)
Hardnes of the tip HRC 60-65
used to remove bands and other bondable attachment
|
4,250.00
|
|
|
Band Remover
(103-04 Anterior)
Hardnes of the tip HRC 60-65
used to remove bands and other bondable attachment
|
4,250.00
|
|
|
|
|
|